|
ACRYLIC
Super-transparent polymethylmethacrylate plastic sheet, with good machinability and weatherability; wide range of tints and thicknesses available ex stock.
ttv offers a wide range of high precision cast as well as standard acrylic under its registered trademark LUXACRYL®, e.g. for model making. The trademark ANTIFLEX® describes LUXACRYL equipped with different types of glare reduction and coatings, mainly used as filters and windows for displays.
This is an overview over ttv’s acrylics (PMMA):
LUXACRYL
High precision cast acrylic in thicknesses from 0.2 to 6.0 mm and thickness tolerances as close as +/- 0.1 mm (for up to 3mm thickness). Wide variety of tints and thicknesses on stock
LUXACRYL-IR
Black, absorbing daylight but allowing maximum transmittance of near-infrared light
LUXACRYL-HT
Heavily cross-linked with increased surface hardness, temperature, chemical and scratch resistance and weatherability
LUXACRYL/2h
Hard coating on both surfaces
LUXACRYL-SP
Mirror sheet with back side silvering
LUXACRYL-ST
Standard acrylic, cast according to DIN EN ISO 7823-1 in thicknesses 3 mm to 20 mm
LUXACRYL-ST strong mat
Heavy mat finish on one surface, mainly for large-scale display windows
LUXACRYL-ST antistatic
conductive coating on both surfaces to meet antistatic requirements. Available also as LUXACRYL-ST/2h antistatic with additional hard coating on both surfaces
Acrylic with cast-in, non-glare surface:
ANTIFLEX-AC
from LUXACRYL
ANTIFLEX-HT
from LUXACRYL-HT
Acrylic with non-glare coating
ANTIFLEX-AR3
LUXACRYL with one-side non-glare coating, developed especially for LCD and TFT
ANTIFLEX-AR3/2h
ANTIFLEX-AR3, but with additional hard coating on both surfaces
ANTIFLEX-AR
LUXACRYL with one-side non-glare coating and considerably increased chemical and scratch resistance
ANTIFLEX-AN
LUXACRYL with one-side ANTI-NEWTON coating
Acrylic with optical AR coating:
ANTIFLEX-2MC-AFP
LUXACRYL with optical antireflective multicoating on both surfaces providing minimum reflectance, additional hard coating on both surfaces plus ANTI-FINGER-PRINT coating on front surface (excellent filter for laser scanners)
Acrylic with optical AR and non-glare coating:
ANTIFLEX-AR3/2MC-AFP
ANTIFLEX-2MC-AFP plus one-side AR3 non-glare coating for applications demanding absolute minimal reflectance
Acrylic for electromagnetic shielding with AR coating:
ANTIFLEX-2MC/ITO
ANTIFLEX-2MC-AFP with conductive ITO (Indium Tin Oxide) coating on both surfaces
(< 100 Ω/□ each surface)
ANTIFLEX-AR3/ITO
ANTIFLEX-AR3/2MC-AFP, but with conductive ITO (Indium Tin Oxide) coating on both surfaces
(< 100 Ω/□ each surface)
ANTIFLEX-AR3/2h-ITO
ANTIFLEX-AR3/2h with additional rear surface conductive ITO (Indium Tin Oxide) coating
(< 30 Ω/□)
ANTIFLEX-AR3/Mesh
LUXACRYL with non-glare coating and cast-in blackened metal mesh (stainless steel V2A with 100 opi – openings per inch).
|
