|
ANTIFLEX®
ANTIFLEX® is ttv’s registered trademark for transparent materials - LUXACRYL, POLYCARBONATE, POLYESTER, FLOAT GLASS – providing glare reduction and contrast enhancement comprising the following finishes: NON-GLARE, i.e. MAT FINISH, or OPTICAL ANTIREFLECTION COATING (AR coating), or a combination of both to maximize glare reduction.
Types of antireflective finishes and materials are described by suffixes (-AC, -AR, -AR3, -2MC-AFP etc.) to ttv’s trademark ANTIFLEX®.
This is an overview over ANTIFLEX materials available from stock:
Acrylic with cast-in non-glare surface:
ANTIFLEX-AC
base material: LUXACRYL
ANTIFLEX-HT
base material: LUXACRYL-HT
ANTIFLEX-AF
base material: Polyester
Acrylic with non-glare coating:
ANTIFLEX-AR3
base material: LUXACRYL with special non-glare coating (developed for LC and TFT displays)
ANTIFLEX-AR3/2h
ANTIFLEX-AR3, but with scratch resistant hard coating on both surfaces
ANTIFLEX-AR
base material: LUXACRYL with scratch and chemically resistant hard coating
ANTIFLEX-AN
base material: LUXACRYL with ANTI-NEWTON-coating
Acrylic with optical antireflection coating:
ANTIFLEX-2MC-AFP
LUXACRYL, but with antireflective multicoating (very low reflectance), hard coating on both surfaces, and ANTI-FINGER-PRINT on front surface (ideal for laser scanner applications)
Acrylglas with optical antieflection and non-glare coating:
ANTIFLEX-AR3/2MC-AFP
ANTIFLEX-2MC-AFP but with additional AR3 non-glare coating to reduce glare to the absolute minimum
Polycarbonate with non-glare coating:
ANTIFLEX-AR-PC
base material: Polycarbonate with coating like ANTIFLEX-AR
ANTIFLEX-AR3-PC
base material: Polycarbonate with special one-side non-glare coating on one surface
Glass, etched, with coatings:
ANTIFLEX-G-GWxx
base material: FLOATGLAS with one-side etched non-glare surface (gloss value GW from 60 to 100)
ANTIFLEX-G-2MC
base material: FLOATGLAS but with antireflective multicoating on both surfaces
Materials for EMI /RFI shielding with non-glare coating:
ANTIFLEX-2MC/ITO
ANTIFLEX-2MC-AFP with additional conductive coating on both surfaces (<100Ω/ each surface)
ANTIFLEX-AR3/ITO
ANTIFLEX-AR3/2MC-AFP with additional conductive coating on both surfaces (<100Ω/ each surface), the first high tech acrylic for effective shielding
ANTIFLEX-AR3/2h-ITO
ANTIFLEX-AR3/2h but with conductive coating on the rear surface (<30Ω/)
ANTIFLEX-AR3/Mesh
base material: LUXACRYL with cast-in blackened stainless steel mesh (V2A; 100 opi)
ANTIFLEX-AR-PC/ITO
ANTIFLEX-AR-PC with additional conductive coating on the rear surface
ANTIFLEX-G-GW80 / L15
base material: ANTIFLEX-G-GW80 with additional conductive coating on the rear surface (15Ω/)
ANTIFLEX-G-2MC / L15
base material: FLOATGLAS with antireflective multicoating on both surfaces plus conductive coating on one surface (15Ω/)
|
