Skip to content

Products
Materials
- - Acrylic
    - - Luxacryl
        LUXACRYL is ttv’s registered trademark for high precision cast clear or tinted acrylic sheet with outstanding optical quality and close thickness tolerances.
      - Luxacryl-IR
        Black acrylic sheet absorbing daylight but allowing maximum transmittance of near infrared light.
      - Luxacryl/2h
        LUXACRYL with hard coating on both surfaces, providing considerably increased scratch and chemical resistance and outdoor durability.
      - Luxacryl-SP
        LUXACRYL mirror sheets with back side silvering of highest optical quality for mirror applications.
      - Luxacryl-ST
        Standard acrylic, cast according to DIN EN ISO 7823-1 in thicknesses 3 mm to 20 mm.
      - Luxacryl-ST antistatic
        Standard cast acrylic with conductive coating on both surfaces to meet antistatic requirements.
      - Luxacryl fluorescent
        Tinted LUXACRYL with fluorescent edge.
  - Antiflex
    - - Antiflex-AC
        LUXACRYL with one-side cast-in non-glare surface.
      - Antiflex-HT
        Heavily cross-linked LUXACRYL with increased surface hardness, temperature, chemical and scratch resistance plus further improved outdoor durability. One-side cast-in non-glare surface.
      - Antiflex-AR3
        LUXACRYL with one-side non-glare coating, developed especially for LCD and TFT.
      - Antiflex-AR3/2h
        Non-glare coating A3, i.e. matt finish like on ANTIFLEX-AR3, but with additional hard coating on both surfaces to increase scratch resistance (surface hardness of 6-8H).
      - Antiflex-AR
        LUXACRYL with one-side non glare coating and considerably increased chemical and scratch resistance, surface hardness of 6H (pencil hardness). Ideal for LEDs and LED displays.
      - Antiflex-AN
        One-side Anti-Newton-coating on LUXACRYL extinguishes Newton ring, wherever the window is mounted in touch with the display surface.
      - Antiflex-2MC-AFP
        LUXACRYL with optical antireflective multicoating and hard coating on both surfaces plus ANTI-FINGER-PRINT coating on front surface. Excellent filter for laser scanners, barcode readers, TFT displays, and all applications demanding high optical quality.
      - Antiflex-AR3/2MC-AFP
        Luxacryl with ultimate glare reduction by combining optical antireflective coating, one-side AR3 non glare coating for applications demanding absolute minimal reflectance.
      - Antiflex-MC-ST
        LUXACRYL or Polycarbonate, standard optical antireflective coating, scratch resistant.
      - Antiflex-2MC/ITO
        Optical antireflective multicoating with AFP, conductive ITO coating on both surfaces.
      - Antiflex-AR3/ITO
        Combines optical antireflective multicoating on both surfaces with one-side non glare and AFP, conductive ITO coating on both surfaces.
      - Antiflex-AR3/2h-ITO
        AR3 non glare and hard coating, additional conductive ITO coating on rear surface.
      - Antiflex-AR3/MESH
        LUXACRYL with non glare coating and cast-in blackened metal mesh.
      - Antireflective multicoating and hard coating, without Anti-Finger-Print, but more chemically resistant than ANTIFLEX-2MC-AFP.
      - Antiflex-AR3-AR5/2h
        Hard coated LUXACRYL with special non-glare coating and Anti-Newton-coating. Excellent performance on touch displays.
  - Polycarbonate
    - - Polycarbonate
        Extruded plastic suited for any type of glazing or transparent cover; high temperature and impact resistance (virtually break proof).
      - POLYCARBONATE –STR1 is a diffuser filter in thicknesses 0.2 mm or 0.4 mm.
      - Polycarbonate antistatic
        Polycarbonate with conductive, antistatic coating on both surfaces. Also available as POLYCARBONAT/2h antistatic with additional hard coating on both surfaces.
      - Antiflex-AR-PC
        POLYCARBONATE with one-side non glare coating considerably increasing scratch and chemical resistance.
      - Antiflex-AR3-PC
        POLYCARBONATE with one-side AR3 non-glare coating, developed especially for LCD und TFT.
      - Antiflex-1MC-ST-PC
        ANTIFLEX®-1MC-ST/PC is a laminate of Polycarbonate and PET film with standard antireflection and hard coating. Lamination of the antireflective hard coated film to both sides of the substrate results in ANTIFLEX®-2MC-ST/PC.
      - Antiflex-AR-PC/ITO
        POLYCARBONATE with one-side non-glare coating and considerably increased scratch and chemical resistance, additional rear side ITO coating.
      - Polycarbonate, scratch and chemical resitant, with Anti-Newton-coating on the rear side.
  - Diffusers
    - - Luxacryl strong matt, clear 1000
        LUXACRYL with heavy matt finish on one surface.
      - Luxacryl-ST strong matt, clear 1000
        Heavy matt finish on one or both surface(s).
      - Luxacryl-ST, opaque 1103
        Both sides matt, translucent acrylic.
      - Luxacryl-ST, opaque 1113
        Excellent light diffusor in 1.0 mm thickness.
      - Luxacryl-ST strong matt, red 1603
        Heavy matt finish on one surface, mainly for large-scale display windows and for use in laminated diffusion filters (see LAMINATES).
      - Luxacryl-STR2, opaque 1110, 1120, 1130
        Opaque LUXCRYL with differing transmission, light diffuser laminated to one side.
      - Polycarbonate-STR1
        POLYCARBONATE –STR1 is a diffuser filter in thicknesses 0.2 mm or 0.4 mm.
  - Glass
    - - Float glass
        Standard clear FLOAT GLASS is available in several thicknesses and is an economical solution for display windows.
      - Floatglass-L15
        FLOAT GLASS with rear side conductive coating (approx. 15 ohms / square).
      - Antiflex-G-GWxx
        Glare reduction achieved by varying grades of etching with different gloss values (GW).
      - Antiflex-G-GW80/L15
        One side non-glare surface by etching, gloss value GW80, conductive coating on the rear surface (approx. 15 ohms / square).
      - Antiflex-G-2MC
        Optical antireflective multicoating on both surfaces.
      - Antiflex-G-2MC/L15
        Optical antireflective multicoating on both surfaces with an additional rear side conductive coating (approx. 15 ohms / square).
  - Laminates
  - Protection films
    - - OptiProtect-h3
        OptiProtect-h3 is a clear, self-adhesive protection film with glossy, hard coated surface.
      - OptiProtect-AR3
        OptiProtect-h3 with non glare coating.
      - OptiProtect-ST
        Uncoated PET transport protection film, light adhesive on the back, does not leave any residue when removed.
Production engineering
Company
- Certification
- Partner
Contact

You are here: TTV GmbH | Materials | Protection films | OptiProtect-ST

OptiProtect^®-ST

Follows shortly!

Contact us

TTV GmbH
Sudetenstraße 53
82538 Geretsried

+49 8171 34690
info@go-ttv.com

Legal info

Terms of Service
Privacy policy
Imprint

Certificate

Member of

© 2024 TTV GmbH

CONTACT

Our team will be happy to help and advise you. We are looking forward to your contact!

Phone: +49 8171-34690

Email: info@go-ttv.com